Your lying in bed.. Feeling just a but aroused so you reach down to your trusty Fleshlight.. lube it up and slip it on..

And it Cold, Clammy, and limp (not to mention other things going limp).. You think your are trying to have fun with a corpse!!

So now you are into the wooing stage. Nice warm baths, long soaks until finally your Fleshlight in in the mood and hopefully are you.


However - with this little (and cheap) mod you can make sure that your Fleshlight can be made ready for quite a while beforehand.

Ok - Parts list. (and its about $5.50 at Bunnings)

1 x 30 cm length of PVC 20mm piping
2 x 20mm End caps

Glue one end cap on and file away the rough edges until it is nice and smooth (and shaped like a cock end :>)

Trim up the other end of the pipe so that the other end cap can fit sugly onto it.

Now - before you go to bed and are having your last tea/coffee etc. Just pour some hot water into the pipe and seal it with the end cap. Lube up your Fleshlight and slip the now warm pipe into it.

By the time you get to bed and a re ready for action - your Fleshlight is delightfully warm and accomodating.. And it will keep warm for ages ehilst you finish off the last few pages of that Exceedingly interesting Novel.

Of course it is good hygine to wash our your Fleshlight in the morning but your wond have to do it at night.

Hope this helps during those long cool winter nights

Haha, thanks for putting that thought into my mind just as I'm about to have my first fleshie delivered!
Guess it will only make it more interesting!

Not a bad idea though. I work with 25 mm Telstra conduit (same as 25mm retic) all day, do you think the larger diameter would be ok? Im guessing the larger volume of water it holds would only make it warm things up quicker!

That is definitely a new and interesting innovative idea for keeping her warm and not too wet Marcwolf.
In the US they have mini warming blankets that they pop the insert into while getting organised for bed etc. Now I don't recommend anyone using these methods for the ice range as they tend to cloud quicker than you'd like.

Your idea is good for the fact that it really is just the canal that needs to be warmed, so well done!

Pash

Hi there Eaglebay.

I'm pretty sure that a slight larger diameter would not be a problem.. Considering what you plan to insert into it after you take the warming tube out. Most guys are a 'bit' wider than 25mm so.. And its only for warming it up, not as a holder :>, although a custom always ready stand would be interedting :>

Take care and have fun

Da Wuff

Hi Pash
I actually have an ICE version (Stealth Ice with Wonder wave) and I have not noticed any changes in coloration at all.

Thanks for the complement re the idea. <blushes>

Take Care

Da Wuff

I used the 25mm conduit method and it worked a little too well!! Was a bit too hot! I left it in for about 10 mins but next time I will try half that time, Its a great idea as it remains dry and stays warm.

Didn't have any problems inserting the larger diameter once the conduit was lubed up. Next time I'm in bunnings I may purchase some 20mm pipe and caps, less volume would equal less heat and would be even easier to insert.

sounds like u guys are onto a winner. Well done