Help - Search - Members - Calendar
Full Version: Paris - Lotus
Fleshlight Australia Forums and Product Reviews > The Fleshlights > Testimonials
jonnyW
I have now had a few hours to consider what I want to say about Paris with the new Lotus texture.


Click to view attachment

Construction:
This is up to the usual Fleshlight standard, and the sleeve appears to be the usual *patented* material. The case continues to be the pearlescent type used for all the Fleshgirls since their introduction, with all the improvements that had from the old silver type.

Therefore, a serious tool, made to do a job and last.

Canal:
You will see the internal profile of the Lotus; briefly a (very) tight entrance, widening slightly, then a reverse lip which is a small diameter again, followed by four wider chambers with a constriction between each. One needs to be about 3" in, when penetrating the reverse lip. To go beyond the third chamber, you will need to be at least 8" in length, which I'm not, only 7 1/2". The whole sequence appears to be small diameter, except for the four chambers.

First FLight:
After liberal lubrication into the canal entrance, to the face of the Fleshlight and of my penis, I was ready to enter. After rubbing the head of my penis up and down the lips, which I would normally do in *real life*, I was able to *force* it inside. There was a VERY tight grip, and initial in-and-out motion resulted in slipping right out again several times; again, not unknown in real life.

Gradually entering deeper, the texture felt smooth - which it is - and next I encountered the reverse lip; considerable pressure was required to penetrate this, when the head "popped through" and I was immediately able to go through the first chamber, and via the constriction into the second chamber. I now started more vigorous movement, being careful to remain inside the reverse lip. At this stage, it felt like a wider series of pronounced *rings* (cf the WW) gripping me all the way from the entrance, with a smooth texture between.

As I achieved a completely full erection, I penetrated the third chamber. Now, the full effect on the head of my penis was almost too much but I was able to edge for a while. At a stage when I felt well in control, suddenly Paris demanded - I can use no other word - that I come NOW.

The resulting orgasm was toe-curling and extreme. I could literally not move for about a minute, and the residual grip on my penis was on the border of pleasure and pain. I felt shaky. Whew!

Cleaning Up:
It does not seem enough merely to run warm water through the canal from the hot tap; the reverse lip means you should turn the top part of the sleeve inside out, to clean in there. Drying also took longer, even using my heated fan.

Conclusions:
Lotus Would be VERY tight for those of you exceeding my girth, which I measured today at 6". Length not very important, since I think everyone will be able to reach and penetrate the reverse ring (is this meant to represent the cervix - surely not?) and get a lot of pleasure. For length, at full penetration I inserted my first figer from the far end to the second joint before contacting the head i.e. I was just under two inches from the end. So, probably most perfectly suited to the "longer and not so thick", but great fun for all...

Will I play with Paris? You can bet on it! Especially when I feel really horny...
lordoth
Excellent testimonial jonny. Very informative. Hopefully I'll get my hands on one in the early future (probably later rather than sooner tho! sad.gif )
countrydude
good read jonny.
def sounds like another one to add to my wish list smile.gif
fazman
Ok, just going to ride jonny's testimonial on this one, since for now I'd prefer not to many posts re the paris lotus, especially as we wont have them for ages yet.

One night in Paris

This is a fleshlight I was quite interested to try out. The opening on the fleshlight girls gives us something not so generic and paris's is a nice pussy to penetrate. It was quite pleasing watching the lips spread apart and I was moving in and out wink.gif

As to the canal. Jonny is very right about having to push into her a little harder initially. I found that once you were past this point, if you pulled back out towards the opening, the canal actually helped to force me out, making work to go back in again, something I enjoyed, especially as I like playing with the opening on fleshlights wink.gif

Further down the canal, it is interesting how it gets loose, then tight. You get a whole lot of different sensations as you thrust in and out. I wouldn't say it's realistic, but dam nice to flight in. Might even have to try it out from the back end just so I get those ridges instantly. Something I do with the other sensations when I want a different feeling again.

Guess I'll be using it for awhile, just so I can get to know paris a little better wink.gif

I know with every other fleshlight I have, I always end up going back to the STU for the best flights.
jonnyW
I hear what you say, Faz, but think the guys (and Pash? - she's quiet again) will still be interested in "advance publicity".
There is a fair number of critical posts on the US site, but there are now many favourable ones too. e.g. a quotation from the US site, from a guy back from service overseas:

First thing is first, the Lotus should be renamed as THE VIRGIN. That's how tight it is. Upon the first insertion, my mind automatically took me back to when I fucked my virgin girlfriend; when I was 16. I actually had to fight it in. Once all the way inside, The Lotus continued to keep my cock in a strong choke-hold, while I started to get a feel for what else awaited me. The nodes are amazing!!!! At first glance of the Lotus I was bummed that the nodes had no texture, but Mr. Shubin & Co. Surely knew what they were doing with this insert. I didn't take my time with it, I blew a load right away. Does it feel like the real thing? I say, fuck yes! Is is better than the WW? It is for me. The simple fact that it makes me believe that I'm fucking a virgin, and that the canal has many different sensations, but no matter what, it maintains that strong grip while you fuck it. Buy it!!!!!


Btw, I agree with you that "being forced back out" can be great fun!

I'll shut up now about Lotus, except for one more post after, say, ten uses. OK?
fazman
lol all good jonny. I dont mind the posts in this thread, just want to keep the amount of threads down until we know they are coming wink.gif
lordoth
Never plowed a virgin myself so might be interesting to try lol (well, according to that guy's testimony anyway)
countrydude
certainly sounds intriguing.
one to try down the track once available.
the vortex looks interesting too in few months time.
FLightinstructor
QUOTE(jonnyw)
One needs to be about 3" in, when penetrating the reverse lip. To go beyond the third chamber, you will need to be at least 8" in length, which I'm not, only 7 1/2". The whole sequence appears to be small diameter, except for the four chambers.


i was reading a testimonial on the us site about a guy who is 5.5 inches long saying he couldnt reach the "cervix node". looking at the pic i find it hard to believe that the inverted node as described on the pic is 5.5 inches from the entrance. that or people are confused as to what is actually the node.

QUOTE
I'm 5.5" and I couldn't even get close to the cervix node using the case


my guess is that the open space before the 4 chambers, or the start of the first chamber is supposed to be the cervix and people are confusing that with the backwards C or "inverted node/lip"

-- edit, found another pic on the US forum with the measurements
tankman
QUOTE(FLightinstructor @ Oct 12 2008, 11:30 PM) *
i was reading a testimonial on the us site about a guy who is 5.5 inches long saying he couldnt reach the "cervix node". looking at the pic i find it hard to believe that the inverted node as described on the pic is 5.5 inches from the entrance. that or people are confused as to what is actually the node.
my guess is that the open space before the 4 chambers, or the start of the first chamber is supposed to be the cervix and people are confusing that with the backwards C or "inverted node/lip"


The cervix is nearer the end of the vagina, so it can't be in the start of the first chamber. Also, it's nearly impossible to penetrate the cervix without doing damage.
fazman
i was thinking the same thing
FLightinstructor
QUOTE(tankman @ Oct 13 2008, 03:48 PM) *
The cervix is nearer the end of the vagina, so it can't be in the start of the first chamber. Also, it's nearly impossible to penetrate the cervix without doing damage.


i know what im saying, is the start of the first chamber is supposed to simulate the cervix? because he describes not being able to reach the "cervix node" at 5.5 inches and the reverse lip certainly doesnt look 5 inches from the entrance so i dont know which part hes talking about

btw jonny, did you get access to the vip fleshlight girls area? wanna show us some exclusive pics?
fazman
lol i have access to it, but all the images are done in flash. I already tried saving them sad.gif
adzy
QUOTE(fazman @ Oct 13 2008, 06:00 PM) *
lol i have access to it, but all the images are done in flash. I already tried saving them sad.gif

Use IrfanView

It can take screencaps of movie files including flash. Just press 'Print screen' on your keyboard and then paste the image - simple
fazman
ont see anywhere where it is mac compatible
adzy
Well then you're stuffed tongue.gif
fazman
oh well, ill just enjoy the vip content myself wink.gif
FLN
QUOTE(fazman @ Oct 14 2008, 07:54 AM) *
ont see anywhere where it is mac compatible

Hi, I'm a Mac. I can't take screenshots. tongue.gif
fazman
i can take screenshots, but dont have any software to crop them with decently sad.gif used to have photoshop, but cant justify the cost of it to actually pay for it on the mac
adzy
Take some photos with a digital camera then dude! Don't just sit there gloating & grinning

edit: Try Copernicus or Flash it (both freeware and for Macs)
fazman
hmm copernicus is interesting, just had a little play with it then. Ill see what I can do for ya's

the other one has been moved.
fazman
dammit, I saved 4 images, but for some reason the forum says the format is invalid, even though they r jpgs, and even when I try to upload them and link to them, my server is 404ing it back to the cart
adzy
Use photobucket for free hosting. It'll have less chance of screwing up and you can always link it if you have problems - if the problem persists try using a different program to open the image & save over the existing file
Graphic
Hey fazman do you know when/if you will be getting any 'Paris Fleshlights' in? (mostly for the lotus texture wink.gif)
Might have to order from the US otherwise =).
fazman
it seems we have lotus fleshlights in the raven and lia's, the rest we think are still wonder waves. At this stage they havent actually added paris to the lineup of fleshlight girls for us that wholesale them yet.

They did tell us that al girls are now coming in as lotus inserts, so as our stock levels run down on the others they will be lotus in the new ones.
lordoth
But if you definitely want a Lotus then you should buy the insert only to be guaranteed one?

*Edit* Nevermind. hadn't gotten to the other thread yet laugh.gif
Pash
Hmmmm very very interesting.

Ok whoever it was that said the cervix is at the end is right. Its the depth of a womens vagina and gets you into the uterus of the woman where babies are made and cooked etc. The opening of the cervix actually looks a look a lot like the Non-descript or Stealth opening.

To me looking at the cutaway of the Lotus it looks all backwards. If you were to go into the end of the insert you would be going through several inches of vagina before your reach the cervix.

For me personally any guys 8.5 and longer will touch my cervix. My cervix is apparently quiet deep, having children meant examinations were a bit trickier for gynae staff.

So Im fascinated by the design of the lotus if they are saying it is the most realistic... because to me it looks backwards or they have got the shape of it right but for it to be that close and for the guy to penetrate it is just not normal lol It can hurt to try penetrating the cervix but it depends on if the lady has had children or not. It can also be stimulating when reaching the cervix... it all depends on how its being stimulated and how stimulated the lady already is by this point. But thats based on my own personal experiences, without getting too much into detail LOL. I have been able to err touch my own cervix which was stimulated and made me orgasm (again, at the time).

This is why a lot of women like it on top too...because when the tip of the guys penis is on her cervix and she is in the right spot she can ride him to orgasm.
Pash
My guess is they made it the way they did so like all fleshlights, one size fits all! If it were placed near the end of the canal then guys who are average or below average length would not get the full benefit of it!
fazman
good explanation pashy
adzy
QUOTE(lordoth @ Oct 9 2008, 01:19 PM) *
Never plowed a virgin myself so might be interesting to try lol (well, according to that guy's testimony anyway)

Plowing a virgin has always been a wish of mine but I don't think it'll ever happen (how many good looking 25 year old virgins are still out there? tongue.gif). I'd have to do jailbait to make it happen or find one with Nazi/highly religious parents (parents who don't let them do anything)

Bit worried about the cleaning & drying stage for the Lotus. Really doesn't seem like rinsing would clean all those nodes and there could be a possibility for mould/bacteria to grow if one doesn't turn it inside out every so often to inspect it. Always lazy when it comes to cleaning

*snip snip*

My butt orifice speedbump isn't seeing much action lately, I've used it about 3 times now and I'm still rather disatisfied with both the texture design and orifice (bad purchase really - even when doing it slow I find it hard to maintain an erection, sort of forcing myself to do some of the work - blah). STU is still the best for those who want something that's not too bumpy yet not too flat
jonnyW
Agree with this. See what I said in my original post in this thread:

"Cleaning Up:
It does not seem enough merely to run warm water through the canal from the hot tap; the reverse lip means you should turn the top part of the sleeve inside out, to clean in there. Drying also took longer, even using my heated fan."

No problems so far, though, but worth watching if you live where the climate has high humidity. BUT I am storing all my Fleshlights in a case with silica gel...

FLightinstructor
anyone know where i can find more of this paris girl?. a website said her real name is sophie paris but the galleries ive found look nothing like her
fazman
crap I had it through one of my sponsors. I'll find it for you if you want. Had access to all the free content for her as well.
fazman
Ok Ive put a page up in the fleshlight chat forum for paris

http://www.fleshlight.com.au/forums/index.php?showtopic=1016

Take a look, this is all the free content I can show ya's. One day I should put together a free members site where we can offer all the other content for viewing too.
auscraig
QUOTE(FLN @ Oct 14 2008, 05:20 PM) *
Hi, I'm a Mac. I can't take screenshots. tongue.gif


I know I'm replying to an old post but I had to correct this...

You can easily take screen shots on a Mac... it's actually easier than on a PC...and you don't need any extra software to crop etc...

Option 1 - Full Screen Shot - Press "Command" - "Shift" - "3" holding each button down until you have all 3 held down. You will hear a camera shutter go off and your screen shot of the entire screen is on the desktop.

Option 2 - Selective Screen Shot - Press "Command" - "Shift" - "4" holding each button down until you have all 3 held down. You will see a "+" on the screen. Drag your mouse to the point where you want the screenshot to start....click your mouse and hold it down and drag a box around the area you want to screen shot... release your mouse and you will hear the camera click...and you have taken a screenshot of just the part of the screen you selected. It's on your desktop.

If you do need to crop.. you can easily do that in "Preview" that comes free with Mac OSX. Just double-click on the screenshot and it will open in preview. Look under "TOOLS" menu for cropping options.

Sorry.. I know it's an old thread... but thought I'd advise how to take a screenshot on a Mac!
The_Man_With_No_Name
QUOTE(auscraig @ Jul 12 2009, 10:15 PM) *
I know I'm replying to an old post but I had to correct this...

You can easily take screen shots on a Mac... it's actually easier than on a PC...and you don't need any extra software to crop etc...

Option 1 - Full Screen Shot - Press "Command" - "Shift" - "3" holding each button down until you have all 3 held down. You will hear a camera shutter go off and your screen shot of the entire screen is on the desktop.

Option 2 - Selective Screen Shot - Press "Command" - "Shift" - "4" holding each button down until you have all 3 held down. You will see a "+" on the screen. Drag your mouse to the point where you want the screenshot to start....click your mouse and hold it down and drag a box around the area you want to screen shot... release your mouse and you will hear the camera click...and you have taken a screenshot of just the part of the screen you selected. It's on your desktop.

If you do need to crop.. you can easily do that in "Preview" that comes free with Mac OSX. Just double-click on the screenshot and it will open in preview. Look under "TOOLS" menu for cropping options.

Sorry.. I know it's an old thread... but thought I'd advise how to take a screenshot on a Mac!


Welcome to the Forums
I still find Print scrn, Ctrl + V into Paint and drag the little square in the corner to be faster and easier or using the snipping tool for me, I still rather the old fashion way just alot faster for me but thanks mate if i ever use a mac I will know how to take a screenshot =)
jonnyW
Welcome to the forums, Auscraig
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.
Invision Power Board © 2001-2012 Invision Power Services, Inc.