Help - Search - Members - Calendar
Full Version: Unsatisfied Experience
Fleshlight Australia Forums and Product Reviews > The Fleshlights > Testimonials
hugoboss
I recently purchased a Pink Lady Wonder Wave courtesy from the Australian Fleshlight crew. I have heard many positive testimonials in regards to the Fleshlight, particularly the Wonder Wave.

The waves feel great however the major problem I encountered was that it was far too loose. Even after tightening the suction cup it would start to make cracking noises as the air suction is too tight and I am thrashing it to the extreme.

So although the fleshlight may feel pleasant I cannot release myself towards the end no matter how hard I try. It feels too loose and it is like throwing a broom down a tunnel.
lordoth
Well, that's a first.
Fellas, shed any light on this?
fazman
QUOTE(hugoboss @ Nov 22 2007, 09:40 AM) *
The waves feel great however the major problem I encountered was that it was far too loose.


hugoboss, this statement leaves me to two thoughts. Firstly, you mayve been using your hand for way to long and have decreased the sensitivity of your penis by not getting a very tight constricting canal around you. Secondly, your girth is not very large. I don't usually mention this one, but it could be possible. If this is the case, then the ultra tight would be the only insert that would give you the tightness you're looking for.

The canal on all the textured inserts, except the stu, is 12mm or 1/2 inch. The stu is a little tighter because of the large lumps. The ultra tight is 1/4inch or 6mm. One does have to remember that the inserts are very soft and do expand quite easily.

One thought, would be to try grabbing a face washer and wrapping it around the insert with some tape before putting it in the case. This would help stop the insert from expanding so easily for you.

These are just all thoughts. Hopefully one of them helps you achieve what we all know the fleshlights can do for us.

Faz
Pash
Hi guys .. Hi Hugo.. I going to throw my 2 c worth in here. I believe perhaps it is just a girth issue.

There are two things I can suggest. One if that you will need to invest in something more like the STU which is a nice snug fit for even a finger. OR as an insert only .. the Speed Bump. And with your existing insert .. get a heap of small rubber bands and put them around the outside of the canal of your insert and hopefully this will close the width a little for you to use. You may have to work with this a little to get it how it will suit you.

Unfortunately this can present a problem when buying adult toys especially when you want to find the right bun for the hotdog and unless you get the opportunity to visit us at a sexpo where we allow you to at least feel with a finger. It can be a tricky process. I find the WW fairly loose compared with the speed bump or stu.

Hopefully this will suffice until you can get yourself a new insert.

Cheers
Pash
Sobek
You know, I would actually look at this as less of a negative and more of a positive... if there's anything I've learned from using Fleshlights, it's that they're actually incredibly customizable. Too loose? Wrap the insert in a towel, rubber bands (as Pash suggested) or anything else you happen to have (a toilet roll was suggested on Fleshlight.com's forums, I tried it but I think you need a bit of a smaller member to make it work in your favour... One thrust and I destroyed the roll).

Try not to look at this like "Great, it's not tight enough and I've wasted my money", but rather as "It doesn't fit as well as I'd like, but I can get creative!". Try using just the insert itself outside of the case and adjust the grip simply by squeezing your hands. Wrap it up really tight inside the case and mount it to something, then bang the living hell out of it. I don't tend to look at things like this as bad, because trying out interesting things with your FL is half the fun!

Another thing I sometimes do is leave the end cap off, and while going away at it just slide one of my fingers into the back of the insert... You get all the suction with half the noise and no 'clanking' sounds (I know exactly what you mean when you talk about that sound. It almost sounds like the end cap were loose and was smashing against the case. Which surprised me because it was on super-dooper tight and just couldn't have been...).

Experiment, see what you can come up with!
Pash
well said Sobek! *winks*
BigAl
Well I guess I should add a couple of bits of information on increasing the FL experience from my personal experimentations >:-)

(1) Suction. Increase this by wrapping a wide rubber band(like the red postal ones) around the end cap were it joins case(no twists, it must lay flat), this has the effect of a one way valve, releases air but doesn't suck it in, tweak it with finger when suction gets to hard. This tightens the whole tube thus increases the friction; not to mention that it feels like that chick who can suck golf balls through a hose pipe laugh.gif

(2) Lubrication. A little goes a long way especially if the insert is warm and wet, your best bet is to mix the lub with water and apply as need with squirter(eyedropper style bottle), mind you this varies depending on size of insert and your tool.

(3) Tightness. Ive heard a few methods of tightening the insert(washcloths, rubber band, etc) but what I found worked really well for me was stretchy ribbon(you get it from sewing shops, its made from lycra), it comes on a spool so you can use as much as you need and its wide with lots of give so you wont choke your chicken.

(4) The "stuff it I just need to blow method" Have you been drinking? Can't feel much? Well try this, take insert out of case and insert your tool from opposite end use you hands to apply required pressure and well, lol yeah you wont last long.


Hope that this may helps those that are having some issues squeezing the max from this amazing gizmo, if you pardon the pun.
fazman
welcome to the forums bigal

Nice input there. The rubber band method Ive not heard of before. Using the insert from the back end is definately an intense experience and brings it back to be a real hands on masturbator
BigAl
QUOTE(fazman @ Nov 27 2007, 07:47 PM) *
welcome to the forums bigal

Nice input there. The rubber band method Ive not heard of before. Using the insert from the back end is definately an intense experience and brings it back to be a real hands on masturbator


TY Faz !
Really wow does that mean I got a new trick already, lol hope it gets named after me.
You should try it, great if you like a good suck job.
Guideline is deep in to increase suction, then short strokes and it acts like those vacuum pumps and really makes you hard.
jonnyW
Welcome to the forums, Bigal. Stay with us, and give us more of your wisdom!
fazman
woo, did u get a con# yet fln, as I ran out of pink stu's last nite. Fleshlight.com has put some more together for us, hopefully we will have them early next week.
fazman
oh, Neal banked a check/money order today I think. We dont get them too often.

How come u went with that way, instead of direct deposit or something like that? Not that it will matter since we wont have stock of them until Monday probably
fazman
that sounds like a pretty fair answer. So ill give u that one then wink.gif

What was ur order number so I can keep an eye out for it?
BigAl
QUOTE(jonnyW @ Nov 28 2007, 04:52 AM) *
Welcome to the forums, Bigal. Stay with us, and give us more of your wisdom!


Thanks JW, I'm sure I will keeping hanging out here with you fellow deviants laugh.gif
lordoth
Hopefully mine will be here when I get home from work this arvo.
fazman
wonder if hugoboss is gonna come back and see whats been said in his thread?
Pash
wooohoo FLN .. well it will get hopefully sent for you Monday or Tuesday *winks*

err yes ok Welcome BigAl.. nice input.. some of your methods are known around the traps.. but always good to see they are now used here in Oz. oi oi oi!

Pash
x
fazman
thanx man, ive let pashy know so we can keep an eye out for it
Pash
aww we're always nice FLN... especially where sending Fladies out to our boys is concerned!!!! rolleyes.gif
fazman
We got your payment now Fln, just waiting for it to clear in the bank now sad.gif

I know money order is a money order but the post office wont let us cash them over the counter anymore cause its in a business name, so now we have to deposit them into the banks.
fazman
itll be in even better hands once it arrives on ur doorstep
Pash
Its a play by play .. hehe
fazman
all packed now fln, con # SQ1663163, will be going in tomorrows shipment
BigAl
LOL guys we seem to have a hard time sticking to the actual thread of the subject matter on this board,
I'm not complaining either I really do hate the mini-Hitler moderators that some boards have,
but then I've used forums for a long time.
Just thinking perhaps new users may get a little confused wink.gif but I'm new so you can tell me to STFU tongue.gif
fazman
lol we do dont we. I think its cause something comes up whilst in a thread and thats where the side trackign happens. All good though, at least its chatty in here. Alot more so this last month than it has been for awhile. I like it when there is quite a few posts to read and reply to.
jonnyW
Yes, I sometimes say this about straying from the subject, but I'm one of the worst at it! Looking back, we've done a lot of it lately. It remains one of the reasons I'm here on THIS board, scarcely ever posting anywhere else!
fazman
love the dedication jonny smile.gif
lordoth
I stray from a subject mid sentence. I'm all over the place. This is why the name Random Tim actually suits my personality, not that anyone really calls me that anymore...
fazman
lol i had to do a double check of ur nik to see if ud changed it then
BlackDagger_Au
Intresting thoughts LOL

Cyaaaaaaaaaaaaaaaaaa
fazman
lol bd, u just pop on in any ol time dont ya
BlackDagger_Au
QUOTE(fazman @ Dec 26 2007, 10:13 PM) *
lol bd, u just pop on in any ol time dont ya



What can u say LOL

All the best for the New Year

Cya
fazman
Thanx BD, hope you have a good new years as well
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.
Invision Power Board © 2001-2012 Invision Power Services, Inc.